Why buy this product?:
Features very low density with great structure. Suitable for the application on large areas without burdening the car body. Offers high filling properties with very easy sanding.
- Very good sanding properties.
- Easy to mix and apply.
- Low specific gravity.
Color – Light green. Gloss Grade – Matt. Density – 1,27 (+/- 0,03) kg/l
The product has very good adhesion to various surfaces. It can be applied over:
- Bare steel and aluminum after flatting and degreasing.
- Zinc coated steel after flatting and degreasing.
- Sanded glass fibre (GFK/GRP), polyester putties, acrylic and epoxy primers and existing coatings in good condition.
Polyester putties can be over coated with:
- 2K polyester putties.
- 2K polyester spray fillers.
- 2K acrylic fillers.
- 2K epoxy fillers.
- Excessive amount of hardener will cause problems with bleaching of the topcoat!
- When working with 2K products, it is recommended to use personal protection equipment. Protect the eyes and respiratory system.
- Clean the guns and equipment immediately after use.
- The rooms should be well ventilated.
Caution: To maintain safety, always follow the instructions given in the MSDS for the products.
Always refer to the products Technical Data Sheet before use.