Spend over $200 and
receive free delivery

Product was successfully added to your shopping cart.

Master Premium Self Leveling Turbo Glaze 450ml

Be the first to review this product

Quick Overview

Master Turbo Glaze 450ml

Availability: In stock

$29.95

Share this Product!

Details

Why buy this product?

Flowable self-levelling polyester putty for car body repairs. Can be used as both filling and finishing putty with excellent adhesion to difficult surfaces. Ideal for the application on large surfaces and for extra quick car body repairs.

  • Instantly ready for sanding (the fastest on the market).
  • Very easy application - effect of self-smoothing up.
  • Low specific gravity. 
  • Very easy to sand, even after full curing.
  • Reduced shrinkage of filler by 95% compared to standard products.
  • Excellent adhesion to zinc coated steel and aluminum.

 

The product shows very good adhesion to various surfaces. It can be applied over:

  • Black steel and zinc coated steel as well as aluminum after flatting and degreasing,
  • Sanded glass fibre (GFK/GRP), polyester putties, acrylic and epoxy primers and existing coatings in good condition.

 

Note: Do not apply the putty directly on the reactive primers, 1K acrylic and nitrocellulose products.

Application Process:

You will need a mixing board, plastic or rubber spreader and a filler knife.

Mixing ratio: By weight - Putty 100 Hardener 2. Stir thoroughly until achieving paste of homogenous color. Stir carefully to avoid air inclusions.

Layer thickness: Putty can be applied in several thin layers. Before application of the next layer, the previous one must be cured. Do not exceed the thickness of 4 mm. Pot life is 4-6 minutes at 20°C.

Curing time: 16÷20 minutes at 20°C. Temperatures below 20°C significantly increases the curing time.

Grinding: Coarse grinding (dry): P100÷P180. Finishing grinding (dry): P180÷P320. It is self-leveling and you will not have to sand it much. 

Further Work:

Polyester putties can be over coated with:

  • 2K polyester putties.
  • 2K polyester spray fillers.
  • 2K acrylic fillers.
  • 2K epoxy fillers.
  • 2K wash primers.

 

General Notes:

  • Excessive amount of hardener will cause problems with bleaching of the topcoat!
  • When working with 2K products, it is recommended to use personal protection equipment. Protect the eyes and respiratory system.
  • Clean the guns and equipment immediately after use.
  • The rooms should be well ventilated.

 

Caution: To maintain safety, always follow the instructions given in the MSDS for the product.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

  1. Be the first to review this product

Write Your Own Review

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Quality
Price
Value