For a more effortless and secure experience on our site, please consider updating your browser

How To Use Polyurethane Protective Coatings "Step By Step".

With more than 100 different use possibilities in the automotive, industrial, agricultural and domestic sectors! AUTOMOTIVE APPLICATIONS: Automotive undercoating and chassis. Automotive primer – specially in car renovations. Bed liner. Body panels. Trunk interiors. SUV floor. Bull bars Wheel arches. Off-road vehicle transmissions. Click her to buy

grape-51-jpg

Measure out the right amount, e.g. pigment paste / solvent base.

In order to color the Rock iT agent, add thinners (for the entire mixture):

  • Pigment paste - 5 ÷ 10%.
  • Acrylic base - 10 ÷ 15%.
  • Polyurethane - 10 ÷ 15%.

Pour the entire content of hardener into the can.

grape-53-jpg

Mix thoroughly until all ingredients combine.

grape-55-jpg

Apply to the panel using the UBS gun until the required structure is obtained. Evaporation time between layers: 30 ÷ 50 minutes.

grape-64-jpg

Measure out the appropriate amount of e.g. pigment paste / solvent base. In order to color the Rock iT agent, add thinners:

  • Pigment paste - 5 ÷ 10%.
  • Acrylic base - 10 ÷ 15%.
  • Polyurethane - 10 ÷ 15%.

grape-43-jpg

Pour the entire content of hardener into the can. Dilute with Troton acrylic thinner.

grape-53-jpg

After all ingredients are thoroughly mixed, pour Rock iT into the RPS cup.

grape-43-jpg

Apply to the panel using a HVLP gun (ø1.4 ÷ 2.5mm) to obtain the required structure. Evaporation time between layers: 30 ÷ 50 minutes.

grape-50-jpg