For a more effortless and secure experience on our site, please consider updating your browser

Troton 2 in 1 Stone Guards 1Lt - 3 Colours Available

$19.95

FREE shipping within Australia over $200.00
Buy online only

Share

Loading Facebook Like button...

Description

Invest in a good stone guard, this will help to minimize damage by stones and other debris that get flicked up. We know from experience that a good stone guard is worth its weight in gold!

Based on rubber and synthetic resin, designed to protect car bodies against mechanical damages, rust and harmful effect of the weather conditions, can also be used as a spray on seam sealer for joints and welds by simply adjusting the spray gun. Sealant has excellent soundproofing properties, and also retains texture after drying. Can be over coated with all conventional lacquer systems.

How to use:

  • Pre-Cleaning - Pre-wash/clean vehicle prior to disassembly (power wash undercarriage area at repair).
  • Removal of Heavy Surface Contaminates - Clean to remove heavy contaminants from repair area.
  • Coating Removal - Remove OEM coating as needed using Scotch-Brite / Clean N Strip disc. Featheredge using grade 80 abrasive on DA sander. Blow off surface with clean, dry air. Clean surface with a All Purpose Cleaner and Degreaser.
  • Filling/Leveling Surface - Use polyester glaze to fill the repair area, bringing it the same level as the surrounding coating.
  • Sanding and Primer - Sand glaze using P150 on a hand block. Final featheredge area using P320 abrasive on a DA sander. Blow off with clean, dry air. Final clean with VOC compliant wax and grease remover. Apply primer following paint company recommendations.
  • Sanding Primer - Apply Car Rep Guide Coat to primed surface. Sand primer using P320 on a DA sander with an interface pad. Blow off with clean, dry air. Final clean with VOC compliant wax and grease remover.
  • Masking - Apply soft edge foam masking tape following existing coating edge. Final mask the area using tape and paper to protect from overspray.
  • Coating Test Panel - Apply the coating to a test panel. Always apply a light coat first, allow it to flash, and adjust the spray equipment to deliver the texture required to match the OEM appearance.
  • Apply Coating - Apply 2 in 1 coating to the repair area using settings from test panel, blending the material into surrounding area as needed.

Antigravel coating:

  • Shake well can before use.
  • Product can be applied using gun with an air-pressure of 3 - 6 bar.
  • Recommended spraying distance is about 30cm.
  • If the intention is to obtain a thicker coating it is recommended to dry the layers in between.
  • Equipment and contaminated surface can be cleaned in fresh condition with solvents. After curing product can be remove only mechanical.
  • Depends of the thickness of the coating, after about 60 - 90 minutes surface can be covered by 2k or basecoat lacquers. Before use of 2k lacquers it is recommended to use a primer according to instruction of paint supplier.

Sealing:

  • Shake well can before use.
  • Product can be applied using gun with an air-pressure of 2 - 4 bar.
  • Recommended spraying distance is about 1 - 2 cm.
  • If the intention is to obtain a thicker coating it is recommended to dry the layers in between.
  • Equipment and contaminated surface can be cleaned in fresh condition with solvents. After curing product can be remove only mechanical.
  • Depends of the thickness of the coating, after about 3 hours surface can be covered by 2k or basecoat lacquers. Before use of 2k lacquers it is recommended to use a primer according to instruction of paint supplier.

Brand: Troton
Type: Stone Guards
Colour: Grey
Size: 1Lt
Item condition: New
Availability: Buy online
ID: 100000785

Shipping policy

Exchange, Returns, and Refunds Policy

Please choose carefully before you buy.

For faulty products, Auto Repairs Direct offer a 14 DAY REPLACEMENT WARRANTY, from the date you receive your product. They do not offer a satisfaction guarantee on any of their products, however due to their high level of customer service, they will always endeavour to keep customers happy and satisfied.

If your product is faulty, it will be replaced with an identical product. If they cannot replace the product, they will offer you the option of choosing another product of the same value, or provide you with a refund for the total value of the faulty product.

Please note: Standard postage fees apply to all return orders. Where the return relates to a faulty item, the replacement product will be sent out to you, at no charge, within 5 working days from the date we receive the faulty product.

When returning your product, please make sure you provide the following details:

  • Your full name
  • Your order number
  • Reason why you are returning the product
  • Your instructions informing us how you would like the issue resolved.

Please include the original order confirmation or invoice you received with your product. Also, if you haven't previously provided a contact phone number, please include this with your return. This will ensure the issue is resolved quickly, should anyone need to contact you.

Troton 2 in 1 Stone Guards 1Lt - 3 Colours Available

$19.95

FREE shipping within Australia over $200.00
Buy online only

Share

Loading Facebook Like button...